您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻

柴油机搅拌罐在使用时要注意什么?

发布时间:2021-08-30 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:普通的混凝土搅拌车,是自汽车发动机取力,然后用液压油泵(齿轮泵或柱塞泵)把来自柴油发动机的旋转动力转化为油泵的液压压力,然后由液压
普通的混凝土搅拌车,是自汽车发动机取力,然后用液压油泵(齿轮泵或柱塞泵)把来自柴油发动机的旋转动力转化为油泵的液压压力,然后由液压管道传送到液压马达,压力转换成动力,通过减速机带动搅拌罐转动。
Ordinary concrete mixer truck takes power from the automobile engine, then uses the hydraulic oil pump (gear pump or plunger pump) to convert the rotating power from the diesel engine into the hydraulic pressure of the oil pump, and then transmits it to the hydraulic motor through the hydraulic pipeline. The pressure is converted into power, and the mixing tank is driven to rotate through the reducer.
除了滚筒式的搅拌机之外,混凝土搅拌罐单罐有以下几种,电机带动的混凝土搅拌罐,柴油机带动的混凝土搅拌罐可以放置在固定地面或者放置在平板车上。
In addition to the drum mixer, there are the following types of concrete mixing tanks. The concrete mixing tank driven by motor and the concrete mixing tank driven by diesel engine can be placed on the fixed ground or on the flat car.
自动上料搅拌车
液压油的循环路径,自齿轮泵或柱塞泵出来之后,直接流向液压马达(齿轮泵还需要通过换向阀来改变液压油路的路径,以此来改变搅拌罐的旋转方向),液压马达出来之后需要冷却,液压油流向散热器,出来散热器之后重新流回齿轮泵或柱塞泵。
The circulating path of hydraulic oil flows directly to the hydraulic motor after it comes out of the gear pump or plunger pump (the gear pump also needs to change the path of the hydraulic oil path through the reversing valve to change the rotation direction of the mixing tank). After the hydraulic motor comes out, it needs to be cooled, the hydraulic oil flows to the radiator, and then flows back to the gear pump or plunger pump.
需要注意的是,单罐没有上装,回去自己使用的时候,尤其要注意看液压油散热片,风扇是否工作。柴油机厂家出厂时候是不带电瓶的,但是液压油散热器风扇是需要供电才能工作的。所以在搅拌车上,一般都有发电机电瓶,上装厂家会直接接好。
It should be noted that the single tank is not installed. When you go back to your own use, you should pay particular attention to whether the hydraulic oil radiator and fan work. The diesel engine manufacturer leaves the factory without battery, but the hydraulic oil radiator fan needs power supply to work. Therefore, there are generally generator batteries on the mixer truck, which will be directly connected by the top loading manufacturer.
如果是电机单罐,一般都是380V的工业电源,厂家一般会选用380V的风扇来给散热器吹风。柴油机带单罐的时候,需要配备电源来给柴油机打火气动,并且给散热器风扇供电。
If it is a single motor tank, it is generally a 380V industrial power supply. Manufacturers generally choose a 380V fan to blow the radiator. When the diesel engine is equipped with a single tank, it needs to be equipped with power supply to ignite the diesel engine pneumatically and supply power to the radiator fan.
有些散热器风扇是由温控开关来控制的,当散热器温度达到一定值,风扇自动启动。所以要注意,开始工作的时候风扇可能没有启动,这个是正常情况。温度很高了还不启动就不正常了!
Some radiator fans are controlled by the temperature control switch. When the radiator temperature reaches a certain value, the fan starts automatically. Therefore, it should be noted that the fan may not be started at the beginning of work, which is normal. The temperature is very high. It's abnormal if you don't start it!
本文由自动上料搅拌车友情奉献.更多有关的知识请点击:http://www.jfhntjbc.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is dedicated by, automatic feeding mixer truck. For more knowledge, please click: http://www.jfhntjbc.com Sincere attitude. To provide you with a comprehensive service. More relevant knowledge, we will continue to offer to you. Please look forward to it

截屏,微信识别二维码