很多操作人员有时候会粗心大意，觉得自己有了多年的驾驶经验，就会在工作时不注意一些事项，所以容易发生一些意外，下面就来讲讲有哪些驾驶经验值得学习吧。
Many operators sometimes careless, feel that they have many years of driving experience, will not pay attention to some matters at work, so it is easy to happen some accidents, the following is to tell what driving experience is worth learning.
卸料前让自动上料搅拌车的搅拌罐全速运转一两分钟。让混凝土充分搅拌，必要时可以加一些水，让混凝土搅拌得更均匀，也方便卸料。放料前先把出料斗溜槽打湿。放料时把车尽量停在平地上放料前先把出料斗溜槽打湿，方便清洗。
Run the agitator tank of the agitator at full speed for one or two minutes before unloading. Let the concrete mix well, adding some water if necessary, to make the concrete mix more evenly, but also easy to unload. Wet the hopper chute before discharging. When feeding, park the car as far as possible on the level before feeding the hopper chute wet, convenient cleaning.
卸料不要大意和放料工打好关系。放料时尽量自己看着，免得放料工乱操作放料操作杆，每次罐子正反转中间位子时尽量停一下，保护减速机，托轮等。与放料工打好关系，卸料时也不要睡的太熟，万一工人闹情绪，把你车子放到工地不转罐子，造成闷罐就麻烦了。
Unloading do not be careless and feeding workers play a good relationship. When feeding, try to watch themselves, so as not to disarrange the feeding operator to operate the feeding rod, and try to stop every time the jar rotates to the middle seat, protect the reducer, supporting wheel, etc. And feeding workers play a good relationship, unloading do not sleep too ripe, in case of workers in a mood, put your car to the site do not turn the pot, causing stuffy pot trouble.
自动上料搅拌车的搅拌罐一定要仔细地冲洗干净。洗罐子时一定要仔细的冲洗干净，并把水反复的正反转两次，再放出来，然后一趟时把水箱的水全部放进罐子，再回到站加水彻底清洗罐子。
The mixing tank of the automatic feeding mixer must be carefully rinsed. The pot must be carefully rinsed, and the water repeatedly reversed twice, and then released, and then put all the water in the tank into the pot, and then return to the station to thoroughly clean the pot with water.
Therefore, the driving experience of automatic feeding mixer is very important. With such experience, you can get twice the result with half the effort and greatly improve safety. For more information, come to the website www.jfhntjbc.com for consultation!
点击拨打服务热线：4008791999
