您好,欢迎光临中科聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车行业持续先行者!

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻 >

自动搅拌车出现不工作的情况怎么找原因?

发布时间:2022-04-27 来源:http://www.jfhntjbc.com/ 浏览量:

概述:  自动搅拌车对于环境的适应能力挺好的,不过要知道在长期使用搅拌机之后,就容易出现突然不工作的现象,尤其是在夏天,出现这种情况的几
  自动搅拌车对于环境的适应能力挺好的,不过要知道在长期使用搅拌机之后,就容易出现突然不工作的现象,尤其是在夏天,出现这种情况的几率会增大。那么自动搅拌车出现不工作的情况怎么找原因?
  The ability of automatic mixer to adapt to the environment is good, but you should know that after long-term use of blender, it is easy to suddenly do not work, especially in the summer, the probability of this situation will increase. So how to find the reason why the automatic mixer does not work?
  要进行彻底的检查,不要着急将搅拌机的电源拔掉,可以重新启动,看一下可不可以正常运行,但是这并不代表着,如果可以正常运行就代表着没有任何问题。即使可以正常运行,我们也需要听一下它工作时震动的声音,看一下是不是有很大的噪音,如果有,说明是主机出现了问题。
  To do a thorough check, don't be in a hurry to unplug the blender, restart it and see if it works, but that doesn't mean there's nothing wrong with it. Even if it works normally, we also need to listen to the sound of vibration when it works, to see if there is a lot of noise, if there is, it means that the host has a problem.
  确定的自动搅拌车油路是否畅通,柴油机供给系统没有空气后,可拆开油泵盖板,板动操纵手柄,拨动油泵拉杆,看拉杆是否灵活和柱塞弹簧是否断裂。
  After determining whether the automatic agitator oil line is smooth and the diesel engine supply system has no air, the cover plate of the oil pump can be removed, the plate dynamic control handle, and the pull rod of the oil pump can be moved to see whether the pull rod is flexible and whether the plunger spring is broken.
  在自动搅拌车拉杆灵活和柱塞弹簧没断的情况下,可启动柴油机中速运转10分钟,还有断火现象时,可用一只铜榔头轻轻敲击输油泵大螺帽,一边敲一边听柴油机声音,如果声音不正常,说明自动搅拌车输油泵活塞和推杆发卡,进行修理或更换。
  In automatic mixers telescopic flexible and plunger spring isn't broken, can activate medium speed diesel engine running 10 minutes, and fire phenomenon, can use a copper hammer tapping the oil transfer pump big nut, while beating while listening to the sound of diesel engine, if the voice is not normal, automatic mixing oil transfer pump piston and push rod hairpin, for repair or replacement.
  油嘴不雾化,油泵柱塞弹簧和弹簧座断裂,卡死不工作,或是柴油内有水。拆下油嘴总成检查开启压力和雾化,如果油嘴总成正常,可让用户用干净柴油装入壶中用油路旁接法进行试验。
  The nozzle does not atomize, the plunger spring and spring seat of the oil pump are broken, stuck and do not work, or there is water in the diesel oil. Remove the nozzle assembly to check the opening pressure and atomization. If the nozzle assembly is normal, the user can use clean diesel oil in the pot for roadside connection test.
  自动搅拌车刚刚停止作业时,发动机的冷却液,所有零件中的油,排气管和消声器都处在高温下,如果拆缷盖子或排油或更换滤油器等都会造成烫伤或其它伤害,应等待温度降下来后再进行保养和检查。
  When the automatic stirring car has just stopped operation, the coolant of the engine, the oil in all parts, the exhaust pipe and the muffler are under high temperature. If the lid is removed or the oil is discharged or the oil filter is replaced, it will cause burns or other injuries. Maintenance and inspection should be carried out after the temperature drops.
  自动搅拌车出现不工作的情况怎么找原因?以上便是相关内容了,我们要懂得用正确的办法来应对这种情况的发生,当然平常的定期养护必不可少。更多知识就来网站www.jfhntjbc.com看看吧!
  How to find the reason why the automatic mixing car does not work? The above is the relevant content, we should know how to use the right way to deal with the occurrence of this situation, of course, the regular maintenance is essential. Come to www.jfhntjbc.com for more knowledge!

截屏,微信识别二维码