您好,欢迎光临中科聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车行业持续先行者!

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻 >

搅拌车的安装调试要根据部件的不同进行

发布时间:2022-07-22 来源:http://www.jfhntjbc.com/ 浏览量:

概述:我们在进行搅拌车的安装的时候,它的调试部分非常重要,千万不能忽视。如果之前不知道怎么做,不如跟着小编深入了解一下,这样以后就不用担
我们在进行搅拌车的安装的时候,它的调试部分非常重要,千万不能忽视。如果之前不知道怎么做,不如跟着小编深入了解一下,这样以后就不用担心无法正确安装调试了。
When we install the mixer truck, its debugging part is very important and must not be ignored. If you don't know how to do it before, it's better to follow the editor in depth, so that you don't have to worry about not being able to install and debug correctly in the future.
1、根据工艺前提、搅拌目的和要求选择搅拌器的类型。在选择搅拌器类型时,应充分掌握搅拌器的动态特性以及搅拌器在搅拌过程中的运动形式与各种搅拌目标之间的因果关系。
1. The type of agitator shall be selected according to the process premise, mixing purpose and requirements. When selecting the type of agitator, we should fully grasp the dynamic characteristics of the agitator and the causal relationship between the movement form of the agitator in the mixing process and various mixing targets.
2、根据确定的搅拌器型号和搅拌器在搅拌过程中的运动状态,工艺对混合时间、沉降速度和分散度的控制要求,通过实施方法和计算机模拟设计,确定电机功率、搅拌速度、搅拌器直径。
2. According to the determined agitator model, the movement state of the agitator in the mixing process, and the control requirements of the process on the mixing time, settling speed and dispersion, the motor power, mixing speed and agitator diameter are determined through the implementation method and computer simulation design.
3、根据电机功率、搅拌速度和工艺条件,从减速机选型表中选择减速机型号。假设根据实际工作扭矩选择减速机,实际工作扭矩应小于减速机的允许扭矩。
3. Select the reducer model from the reducer selection table according to the motor power, mixing speed and process conditions. Assuming that the reducer is selected according to the actual working torque, the actual working torque should be less than the allowable torque of the reducer.
4、根据减速机的输出轴头d和搅拌轴系统的支承方式,选用与d相同型号规格的机架和联轴器。
4. According to the support mode of the output shaft head D of the reducer and the mixing shaft system, the frame and coupling with the same model and specification as D are selected.
5、根据机架的搅拌轴头尺寸、安装空间、工作压力和工作温度选择轴封的类型。
5. The type of shaft seal is selected according to the size of the mixing shaft head of the frame, installation space, working pressure and working temperature.
自动上料搅拌车
6、根据安装方式和结构要求,设计选择搅拌轴的结构型式,并检查其强度和刚度。
6. According to the installation method and structural requirements, the structural type of the mixing shaft is designed and selected, and its strength and stiffness are checked.
7、根据机架的DN、轴架类型和搅拌轴的压力等级选择底盖、法兰座或法兰。
7. The bottom cover, flange seat or flange shall be selected according to the DN of the frame, the type of shaft frame and the pressure grade of the mixing shaft.
8、根据支架和抗振条件,确定是否可以配备辅助支架。
8. Determine whether the auxiliary support can be equipped according to the support and anti vibration conditions.
在上述选型过程中,可以参考自动上料搅拌车的搅拌和安装的组合和设备。设备过程中部件之间的连接轮毂尺寸为轴头尺寸,轴头尺寸相同的部件可按规则互换组合。
In the above selection process, you can refer to the combination and equipment of mixing and installation of automatic feeding mixer. The size of the connecting hub between components in the process of equipment is the size of the shaft head, and components with the same size of the shaft head can be interchanged and combined according to rules.
以上就是对搅拌机安装调试的梳理,希望大家看完这篇文章的介绍后,可以更加了解自己需要做什么。更多相关内容就来网站http://www.jfhntjbc.com关注咨询吧!
The above is the sorting of mixer installation and debugging. I hope you can know more about what you need to do after reading this article. Come to the website for more relevant content http://www.jfhntjbc.com Pay attention to consultation!

截屏,微信识别二维码