Transportation of concrete, generally will not choose ordinary truck, but use automatic mixer truck, mixing concrete while running this kind of vehicle. In this way, not only can the concrete be mixed in time to prevent the concrete from drying, but also it can be more safely run to the destination. How to operate its discharge rod? This knowledge will be introduced in the following:

　　1、自动搅拌车启动前，应将搅拌操纵杆放在“空档”位置；

　　1. Before starting the automatic mixer, the mixing control lever should be placed in the "neutral" position;

　　2、启动后，应将搅拌操纵杆放在“卸料”位置，放去筒内积水；

　　2. After start-up, the mixing control rod should be placed in the "unloading" position to drain the water in the cylinder;

　　3、装料时，搅拌操作杆应放在“装料”位置；

　　3. When loading, the mixing operating rod should be placed in the "loading" position;
            

　　4、运输前，自动搅拌车卸料槽必须固定在“行驶”位置，防止摆动；

　　4. Before transportation, the discharge tank of the automatic mixer must be fixed at the "running" position to prevent swing;

　　5、操作操纵杆时，应在“空档”位置稍作停留后方可动下一个位置。

　　5. When operating the control lever, it should be in the "neutral" position for a while before moving to the next position.

　　大家在操作放料杆的时候，请严格按照步骤进行。自动搅拌车的放料杆，只有用户正确进行操作，才能让车的效率更高，大家在操作过程中一定要找准位置。

　　Please strictly follow the steps when operating the discharging rod. The discharging rod of the automatic mixer can make the truck more efficient only if the user operates it correctly. We must find the correct position in the operation process.

　　以上是关于自动搅拌车放料杆如何操作的步骤，希望对大家有所帮助，如想要了解更多内容欢迎点击我们的http://www.jfhntjbc.com网站。

　　The above is about how to operate the discharging rod of the automatic mixer. I hope it will help you. If you want to know more, please click our http://www.jfhntjbc.com Website.