当混凝土搅拌车安装完毕时，调试并不是一个缺失的过程，调试用户可以放心使用，如何准确调试呢？

When the concrete mixer is installed, debugging is not a missing process, debugging users can rest assured to use, how to accurately debug it?

在调试控制系统时，重设应急按钮，关闭电器柜中的电源，关闭各支路断路器、控制回路电源开关、控制室电源开关，检查电气系统中是否存在异常现象，是否立即进行检查。

When debugging the control system, reset the emergency button, turn off the power in the electrical cabinet, turn off the branch circuit breaker, control circuit power switch and control room power switch, and check whether there is any abnormal phenomenon in the electrical system and whether it is checked immediately.

打开每台马达的按钮，试试马达转向是否准确，如果不准确，应立即调整。

Turn on the button of each motor to see if the motor steering is accurate. If not, adjust it immediately.
          

启动混凝土搅拌车的空气泵，等待空气压力达到要求，按按钮标记启动每扇气体控制门，以确定是否动作灵敏。

Start the air pump of the concrete mixer, wait for the air pressure to meet the requirements, and press the button mark to start each gas control door to determine whether it is sensitive.

调整微机的零点和灵敏度，检查空压机的开关是否正常，气压表是否准确，调整安 全阀的压力以规范刻度。

Adjust the zero point and sensitivity of the microcomputer, check whether the switch of the air compressor is normal, whether the barometer is accurate, and adjust the pressure of the safety valve to standardize the scale.

试试看搅拌车是否显示出异常的噪音，以及每个部件是否能正常工作。

Try to see if the mixer shows abnormal noise, and whether each part can work properly.

在带式输送机的调试中，有必要进行工作，在运行过程中看每一辊的运行是否灵敏，要仔细检查皮带，不能有摇动、跑偏、磨磨、打滑、变形等情况。

In the commissioning of the belt conveyor, it is necessary to work, in the process of operation to see whether the operation of each roll is sensitive, to carefully check the belt, can not have shaking, deviation, grinding, slipping, deformation and so on.

在调试混凝土配料机时，必 须多按配料按钮，看它是否灵敏，是否能准确安装，然后在调试配料时参考。

When debugging the concrete batching machine, you must press the batching button to see if it is sensitive and can be installed accurately, and then refer to it when debugging the batching machine.