During the operation and use of the automatic feeding mixer, the temperature will naturally rise due to long-term uninterrupted operation, but if the temperature exceeds the temperature that the equipment itself can withstand, the equipment will be damaged to a certain extent. Therefore, when the equipment temperature is too high, we need to carry out corresponding maintenance. Let's have a look.

1.防止发动机过热：由于环境温度较高，因此发动机容易过热。必须加强对发动机冷却系统的检查和维护，包括对水箱，恒温器，水泵，风扇等部件的检查，并注意及时添加。装满冷却水。当水温超过100°C时，请停在凉爽的地方冷却下来，让发动机以怠速运转，然后打开引擎盖以帮助散热。

1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. The inspection and maintenance of the engine cooling system must be strengthened, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to adding them in time. Fill with cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, let the engine run at idle speed, and then open the hood to help dissipate heat.

2.防止发动机爆燃：夏季温度较高，有时会超过35℃。在这个季节，某些零件老化的汽车自然爆燃的可能性更高。所以要做好准备。

2. Prevent engine deflagration: the temperature is high in summer, sometimes exceeding 35 ℃. In this season, cars with aging parts are more likely to deflagration naturally. So be prepared.

3.防止损坏汽车漆：强烈的阳光照射下，汽车漆会变旧并起皱。尽管普通的美容蜡可以起到一定的防晒作用，但是任何汽车蜡都含有硅，这种硅将持续很长时间。紫外线会腐蚀涂料，留下黑点。车蜡本身不具有增强硬度和抗紫外线的作用。相反，它会由于高温而迅速丢失。停车时，请注意将车尽可能停在凉爽的地方。

3. Prevent damage to the car paint: under strong sunlight, the car paint will become old and wrinkle. Although ordinary beauty wax can play a certain role in sunscreen, any car wax contains silicon, which will last for a long time. Ultraviolet light will corrode the paint and leave black spots. Car wax itself does not have the effect of enhancing hardness and anti ultraviolet. On the contrary, it will be lost quickly due to high temperature. When parking, please pay attention to parking in a cool place as far as possible.

4.防止轮胎爆裂：温度高，因此更容易爆裂。当温度太高时，容易使轮胎变形并降低拉伸强度。于轮胎本身，非标准气压，轮胎老化，性能减弱或在行驶过程中轮胎在硬质金属或其他硬物上滚动等都会导致汽车突然爆裂。

4. Prevent tire burst: the temperature is high, so it is easier to burst. When the temperature is too high, it is easy to deform the tire and reduce the tensile strength. As for the tire itself, non-standard air pressure, tire aging, reduced performance or tire rolling on hard metal or other hard objects during driving will cause the car to burst suddenly.

5.防止发动机润滑不良：温度较高时，机油粘度会降低，抗氧化性会下降，从而导致润滑不良。因此，应经常检查机油数量和质量，并及时添加或更换。有必要及时清洗机油滤清器和散热器，以确保机油没有溢出。锁定时，散热良好，并尽量避免使发动机过载。

5. Prevent poor engine lubrication: when the temperature is high, the oil viscosity will decrease and the oxidation resistance will decrease, resulting in poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. It is necessary to clean the oil filter and radiator in time to ensure that the oil does not overflow. When locked, the heat dissipation is good, and try to avoid overloading the engine.

6.防止制动故障：在高温环境下，制动液更容易蒸发和汽化，在制动管路中形成空气阻力，并且制动蹄也容易烧蚀，从而导致制动故障。 因此，应经常检查和调整制动系统，并注意在长的斜坡上停车和干燥制动器，以确保良好的制动性能。 如果发现制动轮毂很热，则应停止冷却，但不要倒入冷水以防止制动轮毂破裂

6. Prevent braking failure: in high temperature environment, the brake fluid is easier to evaporate and vaporize, forming air resistance in the brake pipeline, and the brake shoes are easy to be ablated, resulting in braking failure. Therefore, the braking system should be checked and adjusted frequently, and attention should be paid to parking and drying the brakes on long slopes to ensure good braking performance. If the brake hub is found to be very hot, stop cooling, but do not pour cold water to prevent the brake hub from cracking

自动上料搅拌车为您提供了以上的精彩内容，更多的精彩内容请点击进入我们的网站：http://www.jfhntjbc.com我们后续会有更多的内容等您查看。

The automatic feeding mixer provides you with the above wonderful contents. For more wonderful contents, please click to enter our website: http://www.jfhntjbc.com We will have more content for you to check later.