您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 行业资讯

让搅拌车车轮耐用的技巧有哪些?

发布时间:2020-08-20 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:  混凝土搅拌一体车经常行驶在马路上,随着车子的行驶,车上的混凝土也会跟着被搅拌,等到了目的地之后,车上的混凝土基本上搅拌完成,不
  混凝土搅拌一体车经常行驶在马路上,随着车子的行驶,车上的混凝土也会跟着被搅拌,等到了目的地之后,车上的混凝土基本上搅拌完成,不干结,可以立刻使用。由于车轮在行驶过程中经常接触地面所以也难免会出现磨损情况。如何让搅拌车车轮耐用?
  The concrete mixer truck often runs on the road. With the car running, the concrete on the truck will be mixed. After arriving at the destination, the concrete on the truck is basically mixed and does not dry, so it can be used immediately. As the wheels often contact the ground in the process of driving, it is inevitable that there will be wear. How to make the mixer wheel durable?
  1、避免原地打方向
  1. Avoid turning in place
  由于车感不佳,很多新手都喜欢原地打方向,这个坏习惯基本上是从驾校里面带出来的。原地打方向会令轮胎的磨损集中在同一个接触面上,造成轮胎局部严重磨损,缩短使用寿命。因此,司机应避免原地打方向,而应该在轮胎滚动时打方向,这样的话,地面给搅拌车轮胎带来的才是多方位且均匀的正常磨损。
  Due to the poor feeling of the car, many novices like to play in situ. This bad habit is basically brought out of the driving school. Turning the direction in place will make the wear of the tire concentrate on the same contact surface, causing serious local wear of the tire and shortening its service life. Therefore, the driver should avoid turning the direction in situ, and should turn the direction when the tire is rolling. In this way, the ground will bring the normal wear of multi-directional and uniform to the mixer tire.
  2、避免撞击路肩和陷入坑洞
  2. Avoid bumping into shoulders and potholes
  有些司机的停车方式比较霸气,他们喜欢让混凝土搅拌车骑上路肩停放。在搅拌车骑上路肩的过程中,轮胎会受到挤压,容易导致搅拌车轮胎侧面的帘子线断裂,造成轮胎鼓包。
  Some drivers are aggressive in parking. They like to let the concrete mixer ride on the shoulder of the road. In the process of mixing truck riding on the shoulder, the tire will be squeezed, which is easy to cause tire cord breakage on the side of mixer tire, resulting in tire bulge.
  路面的坑洞同样要避开。当搅拌车轮胎碾过坑洞时,搅拌车轮胎同样会受到挤压。坑洞越大、车速越高,轮胎受到的挤压力度也越大,这样也会导致轮胎出现鼓包。
  The potholes on the road should also be avoided. When the mixer tire runs through the hole, the mixer tire will also be squeezed. The larger the hole and the higher the speed, the greater the pressure on the tire, which will also lead to the tire bulge.
            搅拌一体车
  3、避免蹭胎壁
  3. Avoid rubbing against the tire wall
  很多时候,蹭胎壁是在搅拌车靠边时无意中造成的,可能是司机车感不佳,也可能是司机开小差。搅拌车轮胎侧面属于轮胎的薄弱部位,磨损严重的话也会造成轮胎鼓包,带来爆胎的隐患。因此,司机在靠边停车的时候,应该多留心搅拌车与路肩的距离,避免蹭胎壁。
  Most of the time, rubbing the tire wall is unintentionally caused when the mixer is drawing near. It may be the driver's poor feeling of the car, or the driver's desertion. The side of the mixer tire is the weak part of the tire. If the tire is seriously worn, it will cause the tire bulge and bring the hidden danger of tire burst. Therefore, the driver should pay more attention to the distance between the mixer and the road shoulder to avoid rubbing the tire wall.
  4、保持合适的胎压
  4. Maintain proper tire pressure
  合适的胎压能保证搅拌体车轮胎的接地面积均匀,减少不必要的磨损。因此,司机应该养成定期检测胎压的习惯,随时了解轮胎的胎压状况。检测胎压可以到专门的维修店,也可以购买胎压计自己检测,胎压标准可参照搅拌车的胎压标签。
  The proper tire pressure can ensure the even ground area of the mixer tire and reduce unnecessary wear. Therefore, the driver should develop the habit of regularly testing the tire pressure, and know the tire pressure status at any time. The tire pressure can be detected in a special repair shop, or you can buy a tire pressure gauge to test it yourself. The tire pressure standard can refer to the tire pressure label of mixer truck.
  5、夏天不要降低胎压
  5. Don't reduce tire pressure in summer
  不少司机错误地认为,夏天气温高,降低胎压能避免爆胎。这样操作,搅拌车轮胎与地面的接触面会加大,摩擦力增加,加快轮胎磨损,而且会导致搅拌车胎温上升更快,更容易爆胎。所以,夏天依然要保持正常的胎压。
  Many drivers mistakenly believe that the temperature is high in summer and reducing the tire pressure can avoid tire burst. In this way, the contact surface between the mixer tire and the ground will increase, the friction force will increase, the tire wear will be accelerated, and the temperature of the mixer tire will rise faster, and the tire will burst more easily. Therefore, it is necessary to maintain normal tire pressure in summer.
  注意大家一定要加强对车轮的保养,另外搅拌车在行驶过程中尽可能避免走一些坑坑洼洼的路,这样可以有效保护了车轮,对于延长车轮的使用寿命有帮助。
  Note that we must strengthen the maintenance of the wheels. In addition, the mixer truck should avoid taking some potholes as far as possible during the driving process, which can effectively protect the wheels and help extend the service life of the wheels.
  以上便是让混凝土搅拌一体车车轮耐用的技巧,感谢您的阅读,希望上述内容对您有所帮助,如想了解更多内容欢迎点击我们的http://www.jfhntjbc.com官网。
  Thank you for your reading. I hope the above content will help you. If you want to know more, please click our http://www.jfhntjbc.com Official website.

截屏,微信识别二维码