After a long time of use, cement concrete mixer may present a series of problems, such as excessive noise, poor braking system, brake system fault, the initiator can not operate normally and so on. Technical personnel should analyze them according to different conditions. Excessive noise may be a problem encountered by every driver, so how to deal with it? Cement concrete mixer manufacturers to deal with excessive noise concrete mixer solution:

一、搅拌筒进料口或出料口进入异物：检查并清理异物（平常用后也要留意清洁整理）

1、 Foreign matters entering the feeding or discharging port of the mixing drum: check and clean the foreign matters (pay attention to cleaning after use)
       

二、搅拌车齿轮间隙过大或齿断裂：及时改换受损零件，调整间隙；

2、 Mixer gear clearance is too large or tooth fracture: timely change the damaged parts, adjust the clearance;

三、轴承弯曲或断裂：没方法，只要换掉了；

3、 Bearing bending or fracture: no way, as long as replaced;

四、水泥搅拌车冷却水温过低：看看节温器，问题太大要改换；

4、 Cement mixer cooling water temperature is too low: look at the thermostat, the problem is too big to change;

五、气门漏气或调整不当：能够拆开气门，停止恰当调整，记住拧紧气门；

5、 Valve leakage or improper adjustment: be able to disassemble the valve, stop proper adjustment, and remember to tighten the valve;