您好,欢迎光临中科聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车行业持续先行者!

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 常见问题 >

自动上料搅拌车五个快问快答题

发布时间:2022-04-22 来源:http://www.jfhntjbc.com/ 浏览量:

概述:  自动上料搅拌车作为大型施工设备,往往在施工期间伴随着问题的出现,所以提前掌握相关的问题内容很重要,下面通过五大快问快答来了解了
  自动上料搅拌车作为大型施工设备,往往在施工期间伴随着问题的出现,所以提前掌握相关的问题内容很重要,下面通过五大快问快答来了解了解。
  As a large construction equipment, automatic feeding mixer is often accompanied by problems during construction, so it is important to master the relevant problems in advance. The following five quick questions and answers are used to understand.
  开自动上料搅拌车应该注意什么?
  开自动上料搅拌车,对有经验的驾驶员来说,一般的安全驾驶常识都会。在此要提醒的是,由于混凝土是流态的,在车辆急转弯的时候要降低速度,以免混凝土转弯时产生的离心力使车辆不稳!
  What should be paid attention to when driving an automatic feeding mixer?
  Open automatic feeding mixer, for experienced drivers, the general sense of safe driving will. Here to remind is, because the concrete is flow state, in the vehicle when the sharp turn to reduce speed, so as to avoid the concrete turn when the centrifugal force to make the vehicle instability!
  混凝土凝固在搅拌车里怎么办?
  混凝土凝固后,其主要成分是硅酸二钙、硅酸三钙。理论上讲,盐酸可以与之反应解除其固态形状。但实际上很难操作,因为搅拌车的料口很小,盐酸量难以控制,且盐酸也可以与搅拌车罐体发生反应。实际出现这种情况,往往是用电焊或气割切开罐体,然后将凝固的混凝土机械破碎。
  What if the concrete solidifies in the mixer?
  After solidification of concrete, its main components are dicalcium silicate and tricalcium silicate. Theoretically, hydrochloric acid can react with it to remove its solid shape. But in practice it is difficult to operate, because the blender mouth is small, the amount of hydrochloric acid is difficult to control, and hydrochloric acid can also react with the mixer tank. The actual occurrence of this situation, often with electric welding or gas cutting cut tank body, and then the solidification of the concrete mechanical broken.
  搅拌车上装指的是什么?
  搅拌车上装指的是搅拌车除底盘挡泥板以外的东西,包括搅拌罐体及支座,进出料斗,液压系统及减速器,水箱及管路,操作连杆机构等。
  What does the mixer truck mean?
  The stirring car refers to the stirring car in addition to the chassis fender things, including mixing tank and support, in and out of the hopper, hydraulic system and reducer, water tank and pipeline, operating connecting rod mechanism.
  搅拌车的焊接工艺是怎样的?
  现在一般厂家都对整个车子的焊接采用全自动无缝焊接,环缝和纵缝均采用全自动无缝焊接。
  What is the welding process of agitator truck?
  Now the general manufacturers of the whole car welding using automatic seamless welding, circular seam and longitudinal seam are using automatic seamless welding.
  How to do with the laborious discharging of the automatic feeding agitator? Have better method besides adding water?
  自动上料搅拌车出料费劲怎么办?除加水外有无更好办法?
  如果是因为混凝土的原因,那就要看看是坍落度太小还是混凝土强度太高,还是混凝土太黏不好下的原因,以上原因可根据施工要求适当调整一下混凝土;如果总是不好下,就要考虑是否叶片角度和下料口那块有问题。
  If it is because of concrete, it is necessary to see whether the slump is too small or the strength of concrete is too high, or the concrete is too sticky under the reasons, the above reasons can be adjusted according to the construction requirements of concrete; If it is always not good, it is necessary to consider whether there is a problem with the blade Angle and the feeding port.
  更多内容您可以来网站www.jfhntjbc.com咨询,有关人员会为您做好详细的解答!
  More content you can come to the website www.jfhntjbc.com consultation, relevant personnel will do a detailed answer for you!

截屏,微信识别二维码