Concrete mixer is widely used, in the use of concrete mixer, wear is inevitable, wear and tear will affect the production efficiency of the equipment, so the most important point in the production process is to minimize the wear of concrete mixer.

　　如何减少混凝土搅拌车的磨损提高生产效率？

　　How to reduce the abrasion of concrete mixer truck and improve the production efficiency?
            

　　是混凝土搅拌车的润滑，需要润滑的地方有很多，加润滑剂的方法和量都不一样，有时候还需要更换新的润滑剂，而且还需要定时定量的假润滑剂，用户一定了解这些润滑技术，保证混凝土搅拌车的润滑。

　　The first is the lubrication of the concrete mixer. There are many places to be lubricated. The method and quantity of lubricant are different. Sometimes new lubricants need to be replaced, and fixed time and quantitative false lubricants are needed. Users must understand these lubrication technologies to ensure the lubrication of concrete mixer.

　　混凝土搅拌车比较容易磨损的部位有振动筛、搅拌叶片、表面、搅拌筒，怎样减少这些地方的磨损？振动筛磨损关键在与振动轴承，用户一定要选择高质量的轴承，润滑装置要合理，用户一定要经常对轴承进行润滑；由于搅拌叶片需要搅拌混凝土，所以一般磨损比较严重，这就需要用户在加物料时注意尽量避免大块硬物体或者钢丝等物体方法搅拌筒内，并经常对搅拌叶片进行检修；混凝土搅拌车表面被磨损的可能原因有微震、滑动、冲击、擦伤、生锈等，这就需要用户在使用时注意，避免碰撞，并保持表面的干净，发现生锈时要及时处理；搅拌筒也经常磨损，这就需要用户当工作结束后马上清理搅拌筒，防止混凝土在搅拌筒内凝固。

　　There are vibrating screen, mixing blade, surface and mixing drum where the concrete mixer is easy to wear. How to reduce the wear of these places? The key to the abrasion of vibrating screen lies in the vibration bearing. The user must select high-quality bearing, the lubricating device should be reasonable, and the user must often lubricate the bearing; because the mixing blade needs to mix concrete, it is generally worn seriously, which requires the user to pay attention to avoid large hard objects or steel wire and other objects when adding materials, and frequently adjust the mixing cylinder Maintenance of mixing blades; possible causes of concrete mixer surface abrasion include micro vibration, sliding, impact, abrasion, rust, etc., which requires users to pay attention to avoid collision, keep the surface clean, and timely deal with rust when finding rust; the mixing cylinder is also often worn, which requires users to clean the mixing cylinder immediately after the work is finished to prevent the concrete from mixing Solidify in mixing drum.