您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻

自动上料搅拌车易损伤部位有哪些呢?

发布时间:2022-11-23 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:自动上料搅拌车易损伤部位有哪些呢?易损伤部位主要是指搅拌车上使用频率较高的零部件,比如液压系统,托轮,滚道,水箱,发动机等等部位。
自动上料搅拌车易损伤部位有哪些呢?易损伤部位主要是指搅拌车上使用频率较高的零部件,比如液压系统,托轮,滚道,水箱,发动机等等部位。
What are the vulnerable parts of the automatic feeding mixer? The easily damaged parts mainly refer to the frequently used parts on the mixer, such as hydraulic system, carrier wheel, raceway, water tank, engine, etc.
我们都知道自动上料搅拌车在行驶过程中罐体是一直转动的,这样才能保证罐内的混凝土不凝固,不离析,罐体的转动离不开托轮和滚道,这两个部位一旦出问题就会造成非常严重的后果——混凝土凝结。所以这两个部位的保养是长久性的,托轮和滚道之间要经常涂抹润滑油,对于滚道上的污物要及时清理,以免影响罐体转动。
We all know that the tank body of the automatic feeding mixer rotates all the time during driving, so as to ensure that the concrete in the tank does not solidify and segregate. The rotation of the tank body cannot be separated from the supporting wheel and the raceway. Once there is a problem with these two parts, it will cause very serious consequences - concrete condensation. Therefore, the maintenance of these two parts is permanent. Lubricant should be applied frequently between the supporting roller and the raceway. The dirt on the raceway should be cleaned in time to avoid affecting the rotation of the tank.
自动上料搅拌车上的液压系统也是非常重要的,搅拌罐侧操作主要是依靠液压系统来实现的,它的保养也是关重要的,比如液压油要定期更换,不要使用劣质液压油,对于液压软件要经常检查,润滑度不够的要及时添加润滑油脂,如有损伤元件要及时更换,保证液压系统的灵活使用。
The hydraulic system on the automatic feeding mixer is also very important. The operation on the side of the mixing tank is mainly realized by the hydraulic system, and its maintenance is also crucial. For example, the hydraulic oil should be replaced regularly, and the low-quality hydraulic oil should not be used. The hydraulic software should be checked frequently. If the lubrication is not enough, the lubricating grease should be added in time. If there are damaged components, they should be replaced in time to ensure the flexible use of the hydraulic system.
自动上料搅拌车
自动上料搅拌车上水箱的大小及安装部位都是厂家经过设计师的精心设计的,所以不要随意的改动,水箱的视水管和过滤网偶尔也要查看一下,视情况更换,以免引起堵塞,影响水位的判断,在冬天工作完成后要及时的将水箱内的水排出,以免结冰引起水箱开裂。
The size and installation position of the water tank on the automatic feeding mixer are carefully designed by the manufacturer, so do not change them at will. The water pipe and filter screen of the water tank should be checked occasionally and replaced as appropriate to avoid blockage and affect the judgment of water level. After the work is completed in winter, the water in the water tank should be drained in time to prevent the water tank from cracking due to icing.
发动机的使用也是非常多的,所以对发动机的保养也要注意,尤其是机油,要经常查看机油,发现机油变质要及时更换,油量变少要及时添加。对于新买的自动上料搅拌车要注意螺栓,因为新车在使用一段时间后各部位的螺栓容易松动,所以在使用的过程中要十分注意,发现松动螺栓及时紧固;新车的行驶速度不易过快也不易过慢,要按规定的时间进行保养。
The engine is also used very much, so we should pay attention to the maintenance of the engine, especially the engine oil. We should check the engine oil frequently. If the engine oil is deteriorated, we should replace it in time, and if the oil quantity becomes less, we should add it in time. Pay attention to the bolts of the newly purchased automatic feeding mixer, because the bolts of each part of the new car are easy to loosen after using for a period of time, so pay great attention during the use process, and tighten the loose bolts in time; The driving speed of a new car is not easy to be too fast or too slow, and maintenance should be carried out according to the specified time.
自动上料搅拌车是建筑工程上主要的专用车型,保养是非常重要的,尤其是使用比较频繁的零部件,保养好了才能增加搅拌车的使用寿命,您还有什么要点没了解到可以随时来联系我们http://www.jfhntjbc.com
The automatic feeding mixer is a major special vehicle for construction projects. Maintenance is very important, especially for parts that are frequently used. The service life of the mixer can be increased only after the maintenance is completed. If you don't know any important points, please contact us at any time http://www.jfhntjbc.com ! 

截屏,微信识别二维码