您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 行业资讯

搅拌一体车驾驭时的相关注意事宜

发布时间:2022-12-05 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:搅拌一体车司机们懂得在运用过程中养护自个的搅拌车,但关于菜鸟朋友们而言,养护归养护,运用归运用,运用与养护是两码事儿。接下来随小编
搅拌一体车司机们懂得在运用过程中养护自个的搅拌车,但关于菜鸟朋友们而言,养护归养护,运用归运用,运用与养护是两码事儿。接下来随小编一起来看看搅拌一体车驾驭时的相关注意事宜,让爱车运用过程中也能养护。
The drivers of the mixing truck know how to maintain their own mixing truck in the process of operation, but for novice friends, maintenance belongs to maintenance, application belongs to operation, and application and maintenance are two different things. Next, let's take a look at the relevant precautions when driving the mixer, so that the car can also be maintained during use.
1、作业设备接连作业时间不应逾越8h。
1. The continuous operation time of operating equipment shall not exceed 8h.
2、运送混凝土的容量,质量及塌落度应符合混凝土行业标准和请求。
2. The capacity, quality and slump of delivered concrete shall comply with the concrete industry standards and requirements.
3、水箱的水量要经常加满,以备急用。水箱加水前,有必要翻开气阀把箱内空气放掉;冲刷时翻开气阀,冲刷结束或许停用时应将水罐内气体放掉。冬季停放时,水箱和供水系统里,不得有剩下水,防止冻裂。注意:水箱仅在供水时加压,不要带着加压水箱在公路上跋涉。
3. The water tank shall be filled frequently for emergency use. Before the water tank is filled with water, it is necessary to turn over the air valve to drain the air in the tank; Turn over the air valve when flushing, and discharge the air in the water tank when flushing is over or when it is out of service. When parking in winter, there shall be no water left in the water tank and water supply system to prevent frost cracking. Note: The water tank is pressurized only when supplying water. Do not travel on the road with the pressurized water tank.
搅拌一体车
4.在运输的时候特别是长距离运输需要使用搅拌一体车车,因为搅拌车不仅能实现长距离运输,而且在运输过程中不断搅拌着混凝土。不让它干成粉末。在此期间轮胎经常和地面打磨接触。如何判断搅拌车轮胎该换了:
4. The mixer truck is required for transportation, especially for long-distance transportation, because the mixer truck can not only realize long-distance transportation, but also continuously stir the concrete during transportation. Don't let it dry into powder. During this period, the tire often contacts the ground for grinding. How to judge that the mixer tire needs to be replaced:
5.胎面花纹的厚度一定要大于1.6毫米,如果你经常驾车行驶在摩擦力低的湿滑路面上,能保证胎面花纹厚度是上述数值的两倍。
5. The thickness of the tread pattern must be greater than 1.6 mm. If you often drive on a slippery road with low friction, you can ensure that the tread pattern thickness is twice the above value.
6.搅拌一体车车胎面花纹磨损指示线。当磨损到达一定程度这些隐藏在胎面沟壑中的指示线就呈现出来。胎面花纹磨损指示线为扁平的橡胶条,与胎面纵向垂直镶嵌在胎面沟壑中。如果轮胎上的几乎所有指示线都清晰可见,意味着你需要尽快更换轮胎了。
6. Tire tread wear indicator line of the mixer truck. When the wear reaches a certain degree, the indicator lines hidden in the tread grooves will appear. The tread pattern wear indicator line is a flat rubber strip, which is vertically embedded in the tread groove with the tread. If almost all the indicator lines on the tire are clearly visible, it means that you need to replace the tire as soon as possible.
本来,搅拌一体车车的运用与养护是休戚相关的,要懂得奇妙地运用搅拌一体车车,才干省去很多不必要的费事。更多相关内容就来我们网站http://www.jfhntjbc.com进行咨询!
Originally, the use and maintenance of the mixer truck are closely related. It can save a lot of unnecessary trouble to know how to use the mixer truck wonderfully. More relevant content will come to our website http://www.jfhntjbc.com Consult!

截屏,微信识别二维码