我们都知道，自动搅拌车实际上本身具备多种系统，分别发挥着不同其有效的作用，才能让搅拌车顺利工作，下面来讲讲自动搅拌车操作系统与电器系统。

As we all know, the automatic mixer truck actually has a variety of systems, which play different effective roles in order to make the mixer truck work smoothly. Now let's talk about the operating system and electrical system of the automatic mixer truck.

操作系统

operating system

自动搅拌车操作系统由控制器、联动轴、软轴及连杆机构组成,主要控制搅拌筒的转速及旋转方向。自动搅拌车后部两侧各布置一套控制器，左右控制器可以实现联动，控制器上只有一根操纵杆，接出端分别通过连杆机构连接到变量泵上，通过改变泵上控制柄的角度来调节油泵的流量，从而实现控制筒体转动的方向和速度，通过左右移动手柄来控制；该手柄同时还端通过软轴连到发动机的油门上，在需要加大转速时可上下移动来操纵手柄，控制此操纵杆来实现筒体转速的提高。

The operating system of the automatic mixer consists of a controller, a linkage shaft, a flexible shaft and a linkage mechanism, which mainly controls the speed and direction of rotation of the mixing drum. A set of controllers are arranged at both sides of the rear of the automatic mixer truck. The left and right controllers can realize linkage. There is only one joystick on the controller. The outlet end is connected to the variable displacement pump through the linkage mechanism. The flow of the oil pump is adjusted by changing the angle of the control handle on the pump, so as to control the direction and speed of cylinder rotation, which is controlled by moving the handle left and right; At the same time, the handle is also connected to the accelerator of the engine through a flexible shaft. When the speed needs to be increased, it can be moved up and down to control the handle, so as to increase the cylinder speed.

电器系统

Electrical system

自动搅拌车的电器系统由三部分组成：冷却风扇控制部分和后示廓灯部分。冷却风扇控制部分：冷却风扇的起停由温度开关自动控制，温度高于65℃时风扇启动，低于60℃时风扇停止。温度开关位于冷却器上，继电器与保险片在蓄电池旁电源继电器盒内。后示廓灯部分：后示廓灯用于夜间表示车后部轮廓大小，与后牌照灯同时点亮与熄灭。

The electrical system of the automatic mixer consists of three parts: the cooling fan control part and the rear position lamp part. Cooling fan control part: the start and stop of the cooling fan is automatically controlled by the temperature switch. The fan starts when the temperature is higher than 65 ℃ and stops when the temperature is lower than 60 ℃. The temperature switch is located on the cooler, and the relay and fuse are located in the power relay box beside the battery. Rear position lamp: the rear position lamp is used to indicate the size of the rear contour at night, and it is turned on and off at the same time as the rear license plate lamp.

有关于自动搅拌车操作系统与电器系统的了解这方面的内容就讲解到这里了，您对此有什么问题要咨询可以随时来我们网站http://www.jfhntjbc.com了解！

That's all for understanding the operating system and electrical system of the automatic mixer truck. If you have any questions, you can come to our website at any time http://www.jfhntjbc.com Understand!