自上料搅拌车是一种工程机械，齿轮是其组成零部件之一。齿轮能够转动就是因为上齿轮和下齿轮之间要形成一对良好的传动关系，只有两者之间的衔接到位了，所以它的运行才能是一个平稳的关系。而打齿其实就是两个金属质地的齿轮之间的硬碰硬，导致齿轮的齿冠部分加快磨损，时间长了、次数多了，本来直角的齿冠就会被磨成圆角，入挡之后咬合就会出现问题，稍微震动很容易就出现掉挡现象。那么，您知道为什么搅拌斗会出现打齿的情况吗？
Self loading mixer is a kind of engineering machinery, and gear is one of its components. The reason why the gear can rotate is that a good transmission relationship should be formed between the upper gear and the lower gear. Only when the connection between the two is in place, can its operation be a stable relationship. In fact, tooth beating is the hard collision between two metal gears, which leads to the accelerated wear of the crown of the gear. For a long time and many times, the original right angle crown will be ground into rounded corners. After entering the gear, there will be problems in the bite, and it is easy to fall off when it vibrates a little. Then, do you know why the mixing bucket has teeth beating?
正常情况来说，车辆中都会有同步器存在，它的作用便是高转速齿轮与即将进入到当时档位齿轮同步的部件。咱们都知道在倒挡情况下，产生打齿现象的次数反而会增加，这首要由于在搅拌斗中没能安装同步器，因此在停止的状态下，齿轮之间的差速器就会随之变小，这样倒挡就会比较顺利.

Normally, there will be synchronizer in the vehicle, which is used to synchronize the high-speed gear with the gear that is about to enter the current gear. We all know that under the condition of reverse gear, the number of tooth beating will increase. This is mainly due to the failure to install the synchronizer in the mixing bucket. Therefore, under the stop state, the differential between the gears will become smaller, so the reverse gear will be more smooth
搅拌斗出现打齿问题除了螺旋伞齿、啮合副本身质量、调整间隙不正确以外，不正确的操作流程是导致搅拌斗出现打齿问题的首要原因。
In addition to the incorrect quality of spiral bevel gear, meshing pair and adjustment clearance, the incorrect operation process is the primary reason for the toothing problem of the mixing bucket.
自动上料搅拌车可实现上料、搅拌、运输以及卸料的全过程，搅拌车自动上料、自动装料、自动抽水、定量加水、自动搅拌，自动化程度是非常高的。尤其是在乡村道路施工过程中用途非常大，但是，作为工程车辆而言也是需要维护保养的，毕竟工作环境比较差，很容易引发一些故障，自动上料搅拌车的维护费用还是不能忽视的，其他用户反映的维护费用也大不相同
The automatic loading mixer can realize the whole process of loading, mixing, transportation and unloading. The mixer can automatically load, automatically load, automatically pump water, quantitatively add water and automatically mix, and the degree of automation is very high. Especially in the process of rural road construction, it is very useful. However, as an engineering vehicle, it also needs maintenance. After all, the working environment is poor and it is easy to cause some faults. The maintenance cost of automatic loading mixer can not be ignored, and the maintenance cost reflected by other users is also very different
以上就是自动搅拌车给大家的精彩内容，更多的精彩内容请点击：http://www.jfhntjbc.com我们后续会有更多的精彩内容等您查看.
The above is the highlights of the automatic mixer. For more highlights, please click: http://www.jfhntjbc.com We will have more wonderful content for you to check later