搅拌一体车因其承载的搅拌车而易于凝结，如果不及时清洗，会损坏搅拌罐，影响搅拌车的使用寿命。因此，搅拌一体车的清洁非常重要。那么搅拌一体车手动擦洗方式是怎样的呢？清洗方法又是怎样的？

The integrated mixer truck is easy to condense because of the mixer truck it carries. If it is not cleaned in time, it will damage the mixing tank and affect the service life of the mixer truck. Therefore, the cleaning of the mixer is very important. So what is the manual scrubbing method for all-in-one mixer? What is the cleaning method?

搅拌一体车手动擦洗方式

Manual scrubbing mode of integrated mixer

将毛巾浸入水中，慢慢润湿整个屋顶。

Dip the towel into the water and slowly wet the whole roof.

用湿毛巾在车顶擦拭测试以除去灰尘，并从上到下逐渐覆盖车窗和灰尘。擦掉污垢不要用沙子擦毛巾。薄膜或玻璃的表面可能会被划伤或划伤。

Wipe the test with a wet towel on the roof to remove the dust, and gradually cover the windows and dust from top to bottom. Wipe off the dirt. Don't wipe the towel with sand. The surface of film or glass may be scratched or scratched.

如果很脏，请用软毛刷擦拭，用水冲洗干净，然后用毛巾擦拭。

If it is very dirty, please wipe it with a soft brush, rinse it with water, and then wipe it with a towel.

再次摩擦主体后，检查是否有灰尘。在这种情况下，请立即再次擦拭，直到干净为止。如上，用干净的干毛巾再次擦拭机身，直没有灰尘或水印。

After rubbing the body again, check for dust. In this case, wipe again immediately until the tip is clean. As above, wipe the body again with a clean dry towel until there is no dust or watermark.

搅拌一体车清洗方法

Cleaning method of integrated mixer

1、每次充电前用水冲洗进料口，使进料口在充电时保持湿润。

1. Before each charging, flush the feed port with water to keep the feed port moist during charging.

2、装车时给随车自带的清洗水箱加水。

2. Add water to the cleaning water tank provided with the vehicle during loading.

3、装料后冲洗进料口，清理进料口附近残留的搅拌车。

3. Wash the feed inlet after loading, and clean up the residual mixer near the feed inlet.

4、在工地卸货后，冲洗卸料槽，然后在搅拌车储罐中加入30-40L的清洗水，使搅拌车储罐在车辆返回时缓慢向前转动。

4. After unloading at the construction site, flush the discharge tank, and then add 30-40l of cleaning water into the mixer tank to make the mixer tank rotate forward slowly when the vehicle returns.

5、下次装车前切记将搅拌车储罐内的污水排放干净。

5. Before the next loading, remember to discharge the sewage in the tank of the mixer truck.

6、每天结束时彻底清洗搅拌车储罐及进出料口周围，确保没有水泥和搅拌车结块。

6. At the end of each day, thoroughly clean the mixer tank and the surrounding of the inlet and outlet to ensure that there is no cement and mixer caking.

7、如不慎忘记及时清洗，请及时用气枪清洗，以免造成罐体清洗的损失。

7. If you accidentally forget to clean it in time, please clean it with an air gun in time to avoid the loss of tank cleaning.

此外如果混凝土凝固在搅拌车里面，会很大程度上影响到搅拌车的正常作业。混凝土凝结在搅拌罐里面的原因有很多，除了没有及时清洗搅拌罐外，其中主要是搅拌车发动机不能运作，没有动力输入液压机而招致液压机中止工作，使得装料罐不能转动而让混凝土凝结在搅拌车罐里面，所以要及时进行清理。更多相关内容您可以来关注我们网站www.jfhntjbc.com资讯！

In addition, if the concrete solidifies in the mixer truck, it will greatly affect the normal operation of the mixer truck. There are many reasons for the concrete to coagulate in the mixing tank. In addition to not cleaning the mixing tank in time, the main reason is that the mixer truck engine can not operate, and the hydraulic machine is suspended due to the lack of power input, which makes the charging tank unable to rotate and makes the concrete coagulate in the mixing tank. Therefore, it is necessary to clean it in time. For more information, you can follow our website www.jfhntjbc Com information!