您好,欢迎光临莱州聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车生产厂家

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻

如何预防自动搅拌机触电故障发生?

发布时间:2022-03-10 来源:http://www.jfhntjbc.com/ 浏览量:0

概述:当多功能搅拌车出现缓慢的送粉现象时,螺旋输送机进料缓慢,进料时间超过2分钟,在正常进料条件下可在20秒内送出。 When the multi-funct
当多功能搅拌车出现缓慢的送粉现象时,螺旋输送机进料缓慢,进料时间超过2分钟,在正常进料条件下可在20秒内送出。
When the multi-function mixer appears the phenomenon of slow powder feeding, the screw conveyor feeding is slow, the feeding time is more than 2 minutes, and it can be sent out in 20 seconds under normal feeding conditions.
影响因素主要是粉罐的送料不良和螺旋输送机的损坏。 粉末进料的不良性能的特征在于粉末拱形,粉末罐的排出口处的材料聚集,蝶阀的开口太小以及粉末罐中的材料不足。 螺旋输送机的损坏主要是由于螺旋叶片的变形,不能正常运输。
The main influencing factors are poor feeding of powder tank and damage of screw conveyor. The poor performance of powder feeding is characterized by powder arch, material accumulation at the outlet of powder tank, too small opening of butterfly valve and insufficient material in powder tank. Screw conveyor damage is mainly due to the deformation of the screw blade, can not be normal transportation.
1.打开气锤破拱装置。
1. Turn on the air hammer arch breaking device.
2.检查粉末罐排放蝶阀的开度,并将蝶阀保持在完全打开位置。
2. Check the opening of the powder tank discharge butterfly valve and keep the butterfly valve in the fully open position.
3.检查粉末罐出口处的物料是否结块。
3. Check whether the materials at the powder tank outlet are caked.
4.检查螺旋叶片是否变形。 如果变形,请将其拆下进行更正或更换。
4. Check whether the spiral blade is deformed. If it is deformed, remove it for correction or replacement.
如何避免多功能搅拌车中的电击
How to avoid electric shock in multifunctional mixer
1、如果小型搅拌机的供电设备选择不当或不匹配,将导致触电和其他生产事故。
1. If the power supply equipment of small mixer is not properly selected or matched, it will lead to electric shock and other production accidents.
2,电工是持有证书的操作人员,否则会因用电不足而引起触电等生产事故。
2. Electrician is a professional operator with certificate, otherwise it will cause electric shock and other production accidents due to insufficient safe use of electricity.
3.如果配电室的操作人员没有接受过培训,如果搅拌机缺乏用电和非法操作的知识,导致触电事故,为什么要避免触电,引起其他生产事故。
3. If the operators in the power distribution room have not received any training, if the blender lacks the knowledge of using electricity and illegal operation, which leads to electric shock accident, why should we avoid electric shock and other production accidents.
4.配电室运行规则,操作规程,警示标志,生产记录,防护设施不足可能导致触电等生产事故。
4. Lack of operation rules, operation procedures, safety warning signs, safety production records and safety protection facilities in the distribution room may lead to electric shock and other production accidents.
5.如果没有措施防止小动物进入配电室,可能会因小动物进入而发生电气事故,这可能会导致其他事故。
5. If no measures are taken to prevent small animals from entering the distribution room, electrical accidents may occur due to small animals entering, which may lead to other accidents.
6.如果配电室的防雷措施不完善,将导致其他生产事故。
6. If the lightning protection measures of the distribution room are not perfect, it will lead to other production accidents.
8.供电能力和设施不符合用电要求,影响其正常使用寿命。
8. The power supply capacity and facilities do not meet the requirements of safe use of electricity, affecting its normal service life.

截屏,微信识别二维码