Automatic feeding mixer is an indispensable equipment in construction, which is mainly used to transport concrete needed in construction. However, due to the corrosion of concrete to steel, it is necessary to clean the equipment after using it. The following small series for you to introduce the automatic feeding mixer cleaning method.

　　1、每次装料前用水冲洗进料口，使进料口在装料时保持湿润；

　　1. Flush the feed port with water before each loading to keep the feeding port moist during loading;

　　2、在装料的同时向随自动上料搅拌车自带的清洗用水水箱中注满水；

　　2. At the same time of loading, the water tank for cleaning water provided by the automatic feeding mixer is filled with water;
            

　　3、装料后冲洗进料口，洗净进料口附近残留的混凝土；

　　3. After loading, wash the inlet to clean the residual concrete near the inlet;

　　4、到工地卸料后，冲洗出料槽，然后向自动上料搅拌车贮罐内加清洗用水30—40L；在车辆回程时保持贮罐正向慢速转动；

　　4. After unloading at the construction site, wash the discharge tank, and then add 30-40l cleaning water into the storage tank of the automatic feeding mixer; keep the storage tank rotating slowly in forward direction when the vehicle returns;

　　5、下次装料前切记放掉自动上料搅拌车贮罐内的污水；

　　5. Before the next loading, remember to discharge the sewage in the tank of the automatic feeding mixer;

　　6、每天收工时要清洗贮罐及进出料口周围，保证不粘有水泥及混凝土结块。

　　6. At the end of each day, the storage tank and the area around the material inlet and outlet shall be cleaned to ensure that there is no cement and concrete caking.

　　自动上料搅拌车的清洗方法就介绍到这里了，以上这些工作只要一次不认真进行，就会给以后的工作带来很大的麻烦，所以希望大家重视自动上料搅拌车的清洗。如您想要了解更多欢迎点击http://www.jfhntjbc.com网站。

　　The cleaning method of automatic feeding mixer is introduced here. If the above work is not carried out seriously once, it will bring great trouble to the future work. Therefore, we hope that we can pay attention to the cleaning of automatic feeding mixer. If you want to know more, please click http://www.jfhntjbc.com Website.