您好,欢迎光临中科聚峰机械有限公司网站! 主营自动搅拌车,搅拌一体车,自动上料搅拌车等各种规格的产品。

自动上料搅拌车行业持续先行者!

点击拨打服务热线:4008791999

您的位置:首页 - 新闻中心 > 公司新闻 >

自动上料搅拌车怎么会出现粘罐问题呢?

发布时间:2022-04-13 来源:http://www.jfhntjbc.com/ 浏览量:

概述:  自动上料搅拌车的使用时间越长,出现的问题就会越多,目前很多用户反映搅拌车出现粘罐的问题,那么今天我们就来分析下原因。   The
  自动上料搅拌车的使用时间越长,出现的问题就会越多,目前很多用户反映搅拌车出现粘罐的问题,那么今天我们就来分析下原因。
  The longer the automatic feeding mixer is used, the more problems will occur. At present, many users report that the mixer has the problem of sticking the tank, so today we will analyze the reasons.
  自动上料搅拌车的搅拌槽叶片设计不合理,导致出料残渣率高,搅拌槽内残料过多;混凝土运输距离过长,运输时间过长。罐内混凝土的“初凝”不仅影响混凝土质量,还会对搅拌车的液压设备造成损坏;施工现场施工不合理。
  The unreasonable design of the stirring tank blade of the automatic feeding agitator leads to high discharge residue rate and too much residual material in the stirring tank. The transportation distance and time of concrete are too long. The "initial setting" of concrete in the tank not only affects the quality of concrete, but also damages the hydraulic equipment of mixer truck. Construction site construction is not reasonable.
  混凝土运到工地后,卸车时间过长,容易造成罐内混凝土凝结;卸料后清洗不彻底,导致叶片和搅拌罐内部混凝土残留,干燥后堆积越来越多;搅拌车工作环境温度过高,特别是夏季白天气温在30℃以上,长期暴露在搅拌罐内温度会更高,所以混凝土会在罐内凝结。
  After concrete is delivered to the site, unloading time is too long, easy to cause concrete condensation in the tank; After unloading, the cleaning is not thorough, leading to the concrete residue in the blade and mixing tank, and the accumulation is more and more after drying; Mixing truck working environment temperature is too high, especially in summer daytime temperature above 30℃, long-term exposure to the mixing tank temperature will be higher, so the concrete will be condensed in the tank.
  所以查明了原因,我们就应该立即去处理。每次完成出站任务后回站,检查自动上料搅拌车储水箱的水量,使自动上料搅拌车水箱内的水随时充满,以防万一的紧急情况。
  So once we find out what's going on, we should deal with it immediately. Check the water quantity of the storage tank of the automatic feeding mixer truck after completing the outbound task each time, so that the water in the tank of the automatic feeding mixer truck can be filled at any time in case of emergency.
  另外,减水剂是一种混凝土外加剂,可以在保持混凝土坍落度的同时减少拌和水量。但是,在添加减水剂的时候,一定要记得有商品混凝土站实验室的人在场,否则混凝土的质量和强度不够,后果由司机承担。
  In addition, water reducer is a concrete admixture that can reduce the amount of water mixing while maintaining the slump of concrete. However, when adding water reducing agent, we must remember the presence of the commercial concrete station laboratory, otherwise the quality and strength of concrete is not enough, the consequences are borne by the driver.
  如果遇到人为因素或不可抗力因素,导致长期无法卸料的情况,应随时检查自动上料搅拌车罐内混凝土状况,一旦发现混凝土开始凝固。向负责人报告后立即卸货,以防整罐报废。
  If there are human factors or force majeure factors that lead to long-term unloading, the concrete condition in the tank of the automatic feeding mixer should be checked at any time, once the concrete begins to solidify. Unload immediately after reporting to the person in charge to prevent the whole tank from being scrapped.
  自动上料搅拌车怎么会出现粘罐问题呢?总之,我们在上面已经讲解了原因以及怎么预防处理内容了,大家还有不懂得地方可以随时来咨询我们,点击网站www.jfhntjbc.com即可联系我们的!
  How can the problem of sticking tank appear in the automatic feeding mixer? In short, we have explained the reasons and how to prevent the content of the above treatment, we still do not know where to consult us at any time, click on the website www.jfhntjbc.com can contact us!

截屏,微信识别二维码